Excellent clutch tuning webinar by Cale Aronson:
Part 1:
Part 2:
We confirmed by the webinar that we’re not very far off on our clutch settings. When we have the unit rebuilt we’ll lower the base pressure spring rate and rely more on counterweight to give us a larger tuning window from what we learned from Cale last evening. I thank Cale for sharing his extensive knowledge with all of us!!
Below is a capture of our RacePak data from last run of 2019. Blue line is Engine/Driveshaft ratio. I’ve placed the vertical cursor where high gear goes 1:1 and clutch lockup is at 6488 engine rpm – we’re shooting for 6600 so we’re close. The blue line also vividly shows where you spike the tires on the gear changes, 1-2 naturally being the worst due to less ground speed and lower ratios. This was with the 3.19 1st gear. – Roger
[Click on photo for full size]