Tag Archives: Clutches

Breaking In Your Clutch

Primarily for street and street/strip cars: THE IMPORTANCE OF CLUTCH BREAK IN EXPLAINED – Ram Clutches – October 29, 2020  

Posted in Clutch, Discussions, Technical Discussions | Tagged | Comments Off on Breaking In Your Clutch

Go through a Pro Stock clutch service with Matt Hartford – NHRA – June 27, 2019

Courtesy of NHRA:

Posted in Clutch, Discussions, Pro Stock News, Technical Discussions | Tagged | 2 Comments

Clutch Testing – August 26th 2017 – Pacific Raceways

  Chevy!   August 26th 2017: This was our first time out with the new Ram clutch and I will admit there was some anxiety on my part. Did we have our initial settings reasonably close [980 base pressure, 4.3 … Continue reading

Posted in Clutch, Discussions, Edwards & Young Updates | Tagged | 3 Comments

New Ram Clutch in Store for our ’57 in 2018

Since 2014 we have had breakage taking our ’57 out of races which we must address. It is clear that our older style Ram clutch with only static pressure adjustment and a very aggressive 6-paddle disc is no longer suited … Continue reading

Posted in BC Super Shifters Racing, Clutch, Discussions, Edwards & Young Updates | Tagged , | 5 Comments

Discussing Our Clutch Set-up and Quickest Pass to Date

With stick cars, they run their quickest when they spin the rear tires a couple of revolutions on the hit as we did on this run. When it dead hooks it looks impressive but you slow down as you pull … Continue reading

Posted in Discussions, Edwards & Young Updates, Technical Discussions | Tagged | Comments Off on Discussing Our Clutch Set-up and Quickest Pass to Date

A look at the RAM single disc sintered iron clutch system

A good look at the new Ram clutch which we have considered for future use in our ’57. [Note, we did install this new Ram clutch in the ’57 in late 2017] Our current Ram clutch does not use centrifugal … Continue reading

Posted in Clutch, Discussions, Technical Discussions | Tagged | 4 Comments