Edwards & Young Off Season Progress Reports

I’ll be posting progress reports here throughout the off-season to keep all informed of what the team is doing for 2017. – Roger

Saturday, September 17, 2016:

Today Chris & Paul installed our refurbished Doug-Nash 5-speed transmission in the ’57. The transmission blocked out of 4th gear at the Nostalgia Race so it was time for maintenance. Liberty replaced the 3rd & 4th gear pro shift rings, and furnished new 1-2 & 3-4 sliders. I also replaced the 1st gear cluster gear with a Liberty cryo gear to strengthen the transmission. I have additional details on the ’57 posted here.  – Roger

IMG_3680

img_3681b

 

Sunday, September 18, 2016:

Chris replaced his electric water pump in his Chevelle which failed in the 4th round of the GM Nationals, with a new Meziere pump. Chris also upgraded his fuel system by installing a new, high-flow 100-micron in-line fuel filter for 2017 replacing his old canister style BG fuel filter. He also tested the valve springs on the 406 and like our ’57, the PacAloy springs are holding up well.

Next we turn our attention to getting Paul’s rebuilt C-4 transmission back in his Mustang for 2017! – Roger

20160917_144806

 

Sunday, November 13, 2016:

This weekend, Chris & Paul got the C4 transmission, rebuilt by Village Transmission, back in Paul’s Mustang and fired the car. This was a challenge as clearances are TIGHT in the Fox-body Mustang. We’ve learned from other Ford owners it is easier to pull and reinstall the engine/transmission assembly as a unit.

Saturday, December 3, 2016:

Today Chris & Paul shortened the tailpipes on the Mustang, replaced the carburetor secondary needle & seat assembly, and secured the strut ball joints properly on the front end, and repaired a header gasket leak. Paul’s Mustang is race ready for 2017!

Monday, January 23, 2017:

Chris sent his old merge collectors which we ran with the 350 back to Performance Welding to have them reworked for the larger 406 SBC. In effect the new merge collectors will have a larger exit than the current conventional collectors we’ve been running on the 406. Here are the finished collectors for 2017:

 

Performance Welding merge collectors for the Chevelle. Smaller/shorter segments were for the 350

 

Thursday, March 2, 2017:

A quick update, we’ve been busy getting the valvetrains back on both the ’57 & Chevelle and working on the trailer with four new tires, winch & battery for the winch. Plus running battery load tests on all the racing & support vehicles. And our tow truck also needs a new battery. Off season required maintenance as we look forward to the upcoming test & tunes! – Roger

Saturday, March 4, 2017:

Today we fired the ’57 and I had Chris run it through the gears on stands while I checked the ignition pattern. Recheck the valve lash and drain the antifreeze and the old buggy is ready for the strip! – Roger

 

Monday, March 13, 2017:

This weekend Paul got the front end on the Mustang aligned which should improve the handling of the car. The left front strut virtually had NO caster prior to the alignment!

We also fired off the Chevelle and tested the ignition pattern on both the Chevelle & Torri’s Pontiac. All looked good and the Chevelle sounded good with the new merge collectors! – Roger

HandanTrailerRepair

Need trailer repairs while at Pacific Raceways?

Call 206-391-9695 for a price quote!

 

Posted in Edwards & Young Updates | 3 Comments

Teaching An Old Dog New Tricks!

An excellent job by John and his team in the Service Dept. of Burien Chevrolet! A week earlier we had the original battery replaced in our recently purchased Certified, Pre-owned 2013 Chevy Traverse. After the battery was replaced I noticed after driving a few miles the charging voltage would drop below 13-volts which this old, retired ASE Certified mechanic believed was a likely charging problem.

They checked the charging system and educated me that the modern charging systems which are now controlled by the PCM will lower the charging rate and voltage when the battery is fully charged, and can drop as low as 12.5 volts. I learned that normal operating voltage can vary from 12.5 to 15 volts depending on the state of battery charge. This is done to lower the battery temp and to slightly increase mileage by diminishing the demand on the alternator. So there is no need to panic unless the red battery light and “conserving battery” warning shows up on your instrument panel. 

So thanks for taking good care of us and for bringing me up to speed on the newer technology! – Roger

Posted in Discussions | 1 Comment

The Edwards & Young Rumor Mill

Happy New Year racers, and during this off season we see rumors circulating in NHRA and across the racing community, and here’s a couple from us!

Will we see Paul running in Pro Bracket in 2017? Is he ready to make the step to a quicker bracket with his Mustang? Or will he continue in Sportsman where he has won two track championships? What say you Paul!

Robert Fedyk photo

 

Rumor is the old man is considering sharing some seat time this year with Chris in the ’57. After all the duffer is getting old (going on 68). Can the young lion convert from an automatic with an airshifter to banging gears with a 5-speed? This duffer thinks he can! 🙂  Could be interesting!

Jim Doyle photo

 

HandanTrailerRepair

Need trailer repairs while at Pacific Raceways?

Call 206-391-9695 for a price quote!

 

Posted in Edwards & Young Updates | 11 Comments

Tentative 2017 Pacific Raceways Schedule

December 22, 2016:

Courtesy of Pacific Raceways sent to me by Chris. REMEMBER THIS IS A TENTATIVE SCHEDULE SUBJECT TO CHANGES!

Check often with Pacific Raceways at: http://pacificraceways.com/ for updates!

Below the tentative PR schedule, I’ve also posted the 2017 BC Super Shifters schedule provided by Jamie RothRoger 

 

2017 BC Super Shifters Schedule:

May 27-28 Mission
June 10-11 Pacific
July 8-9 Mission
July 22-23 Bremerton
Aug 26-27 Mission
Sept 9-10 Mission

Courtesy of Jamie Roth

Scott Nation
BC Super Shifters

Posted in Edwards & Young Updates | Comments Off on Tentative 2017 Pacific Raceways Schedule

Waiting For Spring!

Coming your way in 2017!:

Posted in Edwards & Young Updates, Videos | Comments Off on Waiting For Spring!

Just Wondering…

December 13, 2016:

Over the years I’ve had a great sense of satisfaction building and designing our engines, maintaining the old Doug-Nash 5-speed, and setting up our own rear gears. Of course I’ve relied on machine shops to do the necessary machine work, but the engines were designed and assembled by us and we learned from our failures and successes.

The one exception was the 406 in the Chevelle. It was cost effective to purchase a short-block assembly with a Dart Little M block, Callies crank, Manley steel rods and Wiseco pistons. To have purchased the individual pieces and paid for the machine work and balance was not cost effective. But with that said we had great input on the build including what main journal diameter we wanted, compression ratio, etc. We also selected the heads, camshaft grind and put the engine together less the short-block assembly and have rebuilt it once ourselves.

Sadly, in my opinion, the trend today even in bracket racing is having your car completely built by someone else, purchase complete engines from an engine builder, etc. The other trend is to replace your ride every few years and go to a bigger engine. Certainly there have been many who have had great success with this type of program but I fail to understand where the personal satisfaction comes from?

Many of the very best racers in Modified Production were those who built their own engines, serviced their transmission, clutch & rear end, and worked hard to improve their chassis. Sadly we are like dinosaurs, creatures of the past.

Roger

Edwards & Young Tech Tips 

 

Edwards & Young 331 in our ’57

Assembled 350 short-block currently in our ’57 with Wiseco pistons. Ring package: .043/.043/3mm low tension oil rings

Coated Wiseco pistons in our 350

406 valve train, 1.6 rockers on exhausts, 1.5 rockers on intakes. New roller lifters

Posted in Discussions | 4 Comments

Merry Christmas!

To all our family & friends and to all the troops here and deployed around the world, God speed & Merry Christmas!

Posted in Edwards & Young Updates | Comments Off on Merry Christmas!

Handan Trailer Repair & Sales Teams Up With Edwards & Young Racing Again For 2017!

handan=trucks

I am very proud to announce that again for 2017 we will continue to have a great sponsorship from Handan Trailer Repairs & Sales for the upcoming season. They will again be riding on all four of our Edwards & Young Racing vehicles! We are very excited to once again be sponsored by such an outstanding company! Kimberly & John have sponsored our team starting in 2015!

They are also now on Facebook here!

Thank you to Kimberly Curtin Collecchi and her husband John for their continued support! – Chris Young

HandanTrailerRepair

Need trailer repairs while at Pacific Raceways?

Call 206-391-9695 for a price quote!

 

Posted in Edwards & Young Updates, Press Release | 1 Comment

QUARTER MILE STICK SHIFT DRAG RACING 2016

Some quarter mile drag racing action for the Ozark Mountain Super Shifters at Heartland Park Topeka during their inaugural Battle of The Brands event in October, 2016. Found by Jamie Roth of the BC Super Shifters:

Posted in Muscle cars, Videos | Comments Off on QUARTER MILE STICK SHIFT DRAG RACING 2016

Hit Me With Your Best Shot!

Music by Pat Benatar:

 

Posted in Videos | Comments Off on Hit Me With Your Best Shot!

Video Review of our 2016 Racing Season

https://youtu.be/YsR6ncy42go

 

HandanTrailerRepair

Need trailer repairs while at Pacific Raceways?

Call 206-391-9695 for a price quote!

Posted in Edwards & Young Updates, Videos | Comments Off on Video Review of our 2016 Racing Season

Chris & Torri Close Our 2016 Season At The GM Nationals

On September 10th, Chris & Torri ran at the GM Nationals at Pacific Raceways in the Hot Rod class to close our 2016 racing season. 

Dave Stoltz captured this picture of them together during a qualifying session:

Dave Stoltz photo of Chris & Torri side-by-side at the GM Nationals during qualifying in the Hot Rod class!

Dave Stoltz photo of Chris & Torri side-by-side at the GM Nationals during qualifying in the Hot Rod class!

 

Torri went out in the 2nd round when she left early, and Chris was driving very well making it to the fourth round before his electric water pump failed, causing the engine to overheat and slowed slightly after cutting an outstanding .009-second reaction time. We don’t believe we’ve damaged the 406 but will check it closely over the winter. Counting his recent win at Champion Raceway, Chris strung together nine straight winning rounds before the water pump ended his day. 

Chris also ran his quickest pass this year during this event running a 10.473 @ 126.13 MPH to identically match the ’57’s best run of 10.473 @ 127.26 MPH on July 10th of this year, and the density altitude of both runs was within 10 feet! The ’57 has a slight MPH edge and we’re very pleased with the performance of our two Chevrolets this year! Can you say match race?

During this 2016 season Paul, Chris & Torri each drove their cars to a final round appearance with both Paul & Chris winning their respective final rounds and Torri earning a well deserved runner-up! Not a bad year for Edwards & Young Racing!

Now we turn to the off season,  Paul has had his damaged C-4 transmission rebuilt by Village Transmission, and we also have refreshed our old Doug-Nash 5-speed which is ready to go back in the ’57. We have no major upgrades planned for the cars over the winter.

Our sincere gratitude to Kimberly & John Collecchi of Handan Trailer Repair & Sales for all their support the past two seasons!  They also sponsored two of the brackets during the 2016 Nostalgia Race at Pacific! – Roger

HandanTrailerRepair

Need trailer repairs while at Pacific Raceways?

Call 206-391-9695 for a price quote!

Posted in Edwards & Young Updates | Comments Off on Chris & Torri Close Our 2016 Season At The GM Nationals